Material
In the actual use process, the cutting objects that the paper cutter has to face are various. In addition to paper and cardboard, there are also leather, plastic, cork flooring and PS plates. Due to the wide variety of materials to be cut, different paper presser pressures should be used accordingly for different materials, and the angle of the cutting edge of the cutting knife should also be changed to ensure high-quality cutting products.
Edge angle
The choice of cutting edge angle is a very important part of cutting work. In other words, a good paper cutter must be equipped with a good paper cutting blade and sharpening process. However, we found in the after-sales service of the paper cutter that many users of the paper cutter often ignore this point. As a result, the impact force during cutting is often increased due to the wrong way, method and angle of sharpening the paper cutter blade. , causing the safety screw to loosen or even break, eventually causing mechanical damage.
The range of materials that need to be cut by a paper cutter is getting wider and wider, such as beer aluminum foil cap labels, carbonless copy paper, honeycomb cardboard, magnetic cards, photosensitive films, etc. These materials will encounter different practical problems during the cutting process. For example, carbonless copy paper is prone to indentation during cutting, while magnetic cards and photosensitive films may appear to be unable to be fixed by the presser during cutting, resulting in waste products. These problems can be solved smoothly by adjusting the pressure of the paper presser and improving the blade and cutting drive system. However, as far as the author knows, only some paper cutter manufacturers in China can solve all these technologies.
