Working Principle Of Paper Cutter

The operation of the paper cutter is relatively simple, and the requirements for the environment are not high. Usually in a general office, the power supply can be guaranteed to work. Generally, the paper cutter has an automatic switch system. As long as paper is put in the input, the paper cutter will automatically rotate to shred the paper. Some paper cutters need to press the start button once, and the paper cutter will rotate to continue cutting paper. After shredding, press the stop/reverse key to stop the paper cutter.
Before shredding, check whether there are paper clips, staples and other hard objects on the documents to be shredded. If there is, it should be removed and then put into the paper opening, otherwise the cutter may be damaged. When using the paper cutter, you should pay attention not to stuff too much paper at one time, especially the paper with better quality. You should pay more attention when using it to avoid paper jams. The paper should be placed in the center of the paper inlet as much as possible.
For early products, once a paper jam occurs during use, you should press the reverse button or the stop button so that the shredder can continue to be used. Most paper cutters are equipped with overload and power-off protection devices. When the motor is overloaded and heats up, it will automatically stop. At this time, stop using it for 20-30 minutes to cool down the motor. At the same time, when using it again, it should be considered to reduce the amount of some input paper appropriately. The more advanced paper cutter will automatically stop and return the paper once it is overloaded, which is more convenient to use. When the box of the paper cutter is full, some machines will automatically sound to remind people to remove the paper scraps in time.