The maintenance and care of the fully automatic paper bowl machine is the key to ensure its long-term stable operation and extend its service life. Here are some specific maintenance and care suggestions:
1. Daily cleaning
Cleaning the surface of the machine: Wipe the surface of the machine with a clean cloth every day to ensure that there is no dust and dirt. Be careful not to use corrosive detergents to avoid damaging the surface of the machine.
Cleaning up production garbage: After each production, clean up the production garbage inside and outside the machine in time, such as waste paper, paper scraps, etc., to prevent blockage and bacterial growth.
2. Regular maintenance
Replacing the air filter: It is recommended to replace the air filter every 3 months to ensure unobstructed air circulation. When replacing, you need to remove the original filter, remove dust and impurities, and then install a new filter.
Cleaning the inside of the machine: Clean the inside of the machine at least once a month, including the bowl mold, mold head, mold cup, and the return water pipe of the cleaning liquid. Before cleaning, you need to turn off the power and disassemble the machine head for thorough cleaning.
Lubricate the machine: Lubricate the machine every six months, disassemble the machine head, and add lubricating oil according to the instructions. The type and amount of lubricating oil must be carried out in accordance with the requirements of the instructions to prevent excessive or insufficient wear and rust.
3. Check and replace parts
Check key parts: During daily use, it is necessary to frequently check the key parts of the paper bowl machine, such as molds, transmission parts, etc., to ensure that there is no damage and wear.
Replace worn parts: If any damaged and worn parts of the machine are found, they should be replaced or repaired in time to prevent malfunctions. When replacing parts, they must be operated in accordance with the requirements of the instructions and cannot be replaced or adjusted casually.
4. Other precautions
Regular maintenance: At the end of each quarter, maintenance should be carried out in accordance with the requirements of the maintenance manual to ensure the normal operation of the machine.
Records and backups: During the maintenance and maintenance process, records and backups need to be kept for future maintenance and management.
Professional maintenance: In case of complex failures or professional maintenance is required, professional maintenance personnel or manufacturers should be contacted in time for processing
